Generate Profits


Home Back

 

 

 

 

 

 

 

Operator Manuals

Newton Cleaner Stationary

 

Newton Cleaner Portable

 

MCi Kicker- Current with rear damper (as shown)

 

MCi Kicker- Old units with front damper

 

MCi Auto Kicker-Current

 

MCi Auto Kicker- Prior to 3-01-2010 with Eason Controller

 

Get Adobe Reader

 

We are also a Certified Cultura/Agris Value Added Reseller (VAR). Call us!!

HOW CLEAN GRAIN CAN GENERATE PROFITS

PROVIDED FROM GRAIN JOURNAL PUBLICATION


Should more grain be cleaned? In today’s market - the answer is yes.

Most corn is going to be stored for a least a year before it hits the market. Cleaning can generate net profits in storage-based operations, despite the lack of market premiums for clean grain in the following areas:

Aeration Costs:

Cleaning grain reduces the air pressure resistance of the grain, this increases airflow and reduces the size of spoutlines that divert airflow and increase fan running time.  Center spoutlines in large tanks and piles usually contain about 10 times the fines percentages as the edges. The spoutlines divert airflow but still control total operating time because that is where spoilage will start first. Reducing spoutlines through cleaning can reduce yearly aeration times for No. 3 corn by 30-50 percent.

Mold and Insect Growth:

Molds and insects prefer to attack broken grains and fines. Fines will support mold growth at 1-1.5 percent lower moistures than will whole kernels.  Furthermore, removing the fines will clean out many insect larvae, egg masses and highly spore-laden particles. The fines absorb fumigants to a higher concentration, reducing their effectiveness in the remaining grain.  Insect and molds generate their own heat; in the poorly aerated environment of a spoutline, they will grow even in cold winter weather. Any increase in molds or insects will, in addition to creating damaged kernels, cause a weight shrink, Estimate about 0.5 percent weight loss per 2-3 percent increase in damage.

Moisture Shrink:

Unnecessary aeration brought on by uneven air distribution removes valuable moisture content. Removing one percent moisture (for example, From 14 to 13 percent) from the cleaner grain at the edges contributes little to storage life but costs about 1.6 cents per bushel in lost weight.  Overly dry grain breaks up more when handled; breakage potential of corn roughly doubles for every two percent reduction in moisture.

Handling Breakage:

Clean grain will have fewer hot spots, therefore less need for turning. Turning grain is expensive, creates bcfm and causes dust shrink. Just not having to rotate long-term storage grain so often would be a significant savings.

A Balance Sheet of Corn Cleaning:

Expenses and Cost Savings Cents/Bushel EXPENSES Loss of saleable weight 6.0 Cleaning cost 2.0

Total expenses 8.0

COST SAVINGS AND REVENUES Feed value of screenings (75 percent of corn) 4.5 Freight savings ($18/ton) 2.0 Aeration cost savings 2.0 Dust shrink savings (0.2 percent 0.3 Mold insect shrink savings (0.5 percent) 0.8 Moisture shrink savings (0.5 percent) 0.8 One less turning 1.0

Total savings & revenues 10.6

Net profits 2.6

Assumptions: Corn value $1.50/bu. aeration rate 0.1 cfm/bu. corn contains 4.0 percent bcfm, electricity cost $0.05 kwh, nine months storage.

top

Company Phone Numbers: 1-316-283-9648 or 1-800-279-6812(U.S.A.)

Company Email: information@midcontinentindustries.com

 
Contact Us

 

Copyright 1998-2017   
Mid-Continent Industries, Inc.
Newton, Kansas 67114
Send mail to webmaster@midcontinentindustries.com with questions or comments about this web site.
Last modified: December 28, 2016